How thick should RAPTOR be per coat?
The average MIL thickness for RAPTOR is 7-10 MIL per [...]
How long do I need to wait before RAPTOR is exposed to rain or water?
Do not allow RAPTOR to come in contact with water [...]
Can I remove RAPTOR once it is fully cured?
RAPTOR is a coating made to last, so it is [...]
How many coats of RAPTOR can be applied?
The recommended RAPTOR application is 2-3 coats with a 60 [...]
How do you use automotive paint tape with RAPTOR?
Wait between 60-90 minutes after applying your final coat of [...]
What PSI should I set my UP0726 RAPTOR Application Gun to?
Typically, 45-60 PSI is recommended. Higher or lower PSI can [...]
What size gun tip should I use to spray RAPTOR?
Depending on the texture desired, once reduced, RAPTOR can generally [...]
What type of roller should be used to apply RAPTOR?
Use a coarse textured foam roller (such as one used [...]
Gun vs. Roller
Applying RAPTOR with a roller will produce very good textures. [...]
