BACK Prepare Plastic with OEM Paint On
#1: Thoroughly wash with soap and water. Degrease the substrate with System 20 solvent or water borne degreaser. This removes any surface contaminants like grease, dirt and industrial fallout.
#2: Abrade the substrate with 180-320 grit.
#3: Any hard to reach areas should be abraded by hand with a red medium scuff pad.
#4: Once abraded, blow off with compressed air and thoroughly degrease with water based degreaser.
#5: Wipe the substrate with a tack rag.
#6: You are now ready to shoot RAPTOR.
Don't miss out ourÂ TOP TIPS!